Water Treatment


MagnaClean Professional2.

MagnaClean Professional2 has been developed by the industry leading company that pioneered magnetic filtration. ADEY’s filters are already protecting nearly 1.5 million heating systems in UK homes removing virtually 100% of the damaging suspended black iron oxide sludge that builds up in all central heating systems. The in-line, push-fit, filter not only extends the operational life of the central heating system, it reduces maintenance and heating energy bills as well as reducing carbon emissions. The versatile filter also enables multiple installation options with a removable spacer positioned between the valves. Having drained the system, it’s possible to install MagnaClean Professional2 in just two minutes saving installers considerable time and trouble. In another significant development, MagnaClean can now be fitted in-line on the return pipe. This delivers a higher level of protection for the boiler and again makes life easier for the installer with quicker fitting times. A new slip socket design enables simple in-line fitting followed by tightening of two compression joints.

Web Links.

MagnaClean Professional2


Caleffi Dirtmag.

Brass dirt separators available vertically in 22mm and 28mm and horizontally in 22mm and 28mm and from ¾” to 2″ screwed iron. They feature a high level of capturing ferrous particles by means of neodymium magnetic inserts contained in a easily removable external band, improved capture of non-ferrous contaminants as a result of ferrous particle drag and extremely quick and easy cleaning thanks to the magnetic band, removable from outside, and to a wider drain cock. Horizontal screwed iron models are also available with insulation supplied as standard, specifically designed not to interfere with cleaning procedures, makes them suitable for any type of system, assuring low heat loss and adequate anti-condensation protection.

Web Links.

Dirtmag range



CalChem’s all-in-one’s easy to use, fast acting formula gives total heating system protection. This special treatment is different because it remains in the system, breaking down contaminants into minute amounts. System efficiency is restored as sludge, scale, flux and other debris are effectively controlled. Boiler noise, venting of radiators and pump seizure are also prevented. Water soluble, non-flammable, and non-acidic, CalChem all-in-one’s reagent chemical gives longer lasting protection against corrosion damage and limescale formation. Suitable for all types of systems, including copper and aluminium, with added antifreeze protection for cold weather conditions.

CalProtector and CalShot Inhibitor.

CalProtector and CalShot Inhibitor is a very effective triple blend corrosion and scale inhibitor. Combining three powerful inhibitors gives maximum protection to materials found in central heating systems, including steels, aluminium, copper and their alloys. CalProtector’s long lasting, proven formula goes on protecting and preserving. For impressive results, simply add after powerflushing and leave. Safe for use with all heating system materials.

CalCleanser and CalShot Cleanser

CalCleanser and CalShot Cleanser pre-commissioning treatment is specially formulated for use with new and existing central heating systems. When used during powerflushing, CalCleanser makes removing and neutralising sludge, flux and installation debris, quicker and easier. Scale, silt, light rust, debris, oils, grease, flocculating magnetite sludges and particulate residues are also effectively removed. Suitable for use with all components, including aluminium and other metals, CalCleanser requires no neutralisation.


CalSilencer is a flocculent blend developed for the fast, effective, removal of silt, mud and sand deposits. This powerful formula is suitable for cleaning and preserving central heating systems, and also for treating sewage lines, drains, cooling towers and water plants. CalSilencer creates a small electrical charge on silt particles, causing them to become buoyant for easier flushing out of the system. Ideal for use with new and old systems, treating with CalSilencer gives a long lasting effect, as solid mass is actively prevented from reforming.

CalShot Leak Sealer

Rapid treatment of inaccessible leaks and weeping joints is easier with CalShot Leak Sealer. The powerful concentrate formula creates a soft seal within 1-24 hours, without blocking pumps, valves, or air vents. The unique concertina applicator has a ½” BSP male neck that fits directly into any standard radiator. Saves time and effort in reducing pressure loss in sealed systems. Simply squeeze CalShot Leak Sealer directly into system and leave – no need for flushing. One 300ml concertina bottle is sufficient for treating up to 10 radiators.

Combined Antifreeze and Inhibitor

Improve your central heating, chilled water or solar system with our combined Antifreeze and Inhibitor. This multi-purpose chemical is suitable for both domestic and commercial use. Mono Propylene Glycol with added heat transfer system cleaning biocide and corrosion inhibitor is used to reduce toxicity; much less environmentally harmful than Mono Ethylene Glycol. A 25% solution gives antifreeze protection to -11°C; with protection to -24°C at 40% solution. Maintains system efficiency, extends system life.

Powerflush Pack

Economical and convenient, the Powerflush Pack contains all the chemicals you need for faster, more effective powerflushing. Pack contents include: 2 X Sludge & Flux Remover, for cleaning and neutralising flux residues, oil, grease, flocculating magnetite sludges and particulate residues. 1 X Silt Free, for shifting deposits of silt, mud and sand, and preventing the reformation of solid mass in water. 1 X Powerflush Descaler, for loosening and dissolving corrosion deposits, limescale and iron oxides. All products are water neutralised – they can also be used with an acidic neutraliser if rapid results are required. Each pack contains enough chemical to treat two average domestic heating systems (based on 10 radiators per system).

CalGlow Magnetic and Electrolytic Scale Inhibitor

Dual technologies are combined in the CalGlow magnetic and electrolytic scale inhibitor. Suitable for installation on cold water lines, for preventing the build-up of limescale. CalGlow is supplied with choice of either 15mm or 22mm compression fittings. No earth bonding needed.

CalFlush Powerflush Unit

A popular choice with professional installers, the CalFlush Powerflush unit is compact, lightweight and easy to use. The unit connects quickly for effective flushing of the whole heating system with only one visit to site.

Web Links.

Chemical range
Scale inhibitors
Power flushing


TF1 Compact Magnetic Filter.

The Fernox TF1 Compact is a high performance in-line filter, which allows hydrocyclonic action to deliver contaminants to the unit’s specially designed magnet assembly,removing and containing them from the system water. The Fernox TF1 Compact has been developed to fit into domestic heating systems where installation access may be restricted. In situations where headroom is limited, the TF1 Compact can be installed at an angle of 45 degrees without compromising performance, to allow magnet removal when cleaning the unit. The Fernox TF1 Compact can be connected directly onto 22mm pipe work using the valve fittings provided. The unit can be installed in either horizontal or vertical pipe work and has been conveniently designed to be positioned flush to a wall. The TF1 Compact can be installed in any of 24 separate orientations enabled by its unique inlet / outlet mechanism, to allow the flow to be in any direction as it passes the unit.

Web Links.

TF1 Compact magnetic filter


IntaKlean Magnetic Filter.

The IntaKlean magnetic filter is the ideal solution to contamination problems resulting in the presence of particles in fluid based heating systems. Thanks to its innovative triple action vortex magnetic filtration system, it filters and holds onto all types of ferrous and non-ferrous debris. The IntaKlean can therefore be used in all heating systems and is recommended to be installed on the boiler supply line. The isolating ball valves on the connections make maintenance and installation easy. As well as being fitted in conjunction with a new boiler It is particularly recommended when replacing parts, for example when fitting condensing boilers in existing systems (with metal pipes and/ or cast iron radiators). The particular geometry, designed for the functionality of the magnet, guides the fluid along a route: the water passes through the mesh of the cartridge and laps against the magnet at the centre of the flow pipe. The non-ferrous particles and/or those that are larger than the filtering cartridge sink to the bottom of the filter due to gravity, while the ferrous residue is caught by the magnet that exerts a constant magnetic field throughout the volume of the cylinder. The impurities deposited at the bottom are simply removed together with the ferrous residue collected around the magnet by opening the filtration chamber. The magnet is completely cleaned by unscrewing the filtration chamber and removing it with the magnet. The IntaKlean magnetic filter is available in 22mm and 28mm sizes.

Web Links.

IntaKlean magnetic filter


Central Heating Chemicals.

  • X100 Inhibitor – For total protection against scale and corrosion in all types of indirect central heating systems, including those containing aluminium.
  • X200 Noise Reducer – For the elimination boiler noise, a unique life-long system treatment.
  • X300 System Cleaner – Flushes out flux and installation debris from new indirect central heating systems and those up to 6 months old.
  • X400 System Restorer – To eliminate the build-up of magnetite sludge, X400 is a ruthlessly efficient, quick and easy way to eliminate cold spots and restore full heat emission.
  • X500 Inhibited Antifreeze – Provides protection against scale and corrosion in all types of indirect heating systems, including those containing aluminium components, whilst preventing freezing.
  • X700 Sanitiser and Biocide – Cleans and protects underfloor heating systems.
  • X800 Jetflo Ultimate Cleaner – A heavy duty cleaning formulation designed to remove corrosion deposits and scale from boiler heat exchangers, radiators and pipework in domestic central heating systems.
  • X900 Filter Aid – To enhance the performance of heating system filters in all types of indirect heating systems including those containing aluminium components.

Web Links.

Central heating chemicals


SpiroTrap MB3.

The SpiroTrap MB3 fuses unrivalled ease of installation, reliability and exceptional magnetic and non-magnetic filtration. It combines the unique SpiroTube with a removable high-power external magnet, based on intelligent magnetic field booster technology, for optimum filtration. The SpiroTrap MB3 is available in 22mm and 28mm sizes.

Web Links.

SpiroTrap MB3